GReddy TRUST Profec Electronic Boost Controller – Just Jap

€ 434.00 · 4.8 (358) · Auf Lager

The new Profec is compact, powerful, and easy to use. The large OLED Display, with the simple two-button / rotary-dial control, makes for intuitive operation. An ultra slim controller can display in digital, bar-graph, or graphical modes and can be rotated 180 degrees for installation with the included adjustable mount
The new Profec is compact, powerful, and easy to use. The large OLED Display, with the simple two-button / rotary-dial control, makes for intuitive operation. An ultra slim controller can display in digital, bar-graph, or graphical modes and can be rotated 180 degrees for installation with the included adjustable mount or flush mounted. By separating the display and control unit in the driver’s compartment, from the engine compartment-mounted, waterproof, sensor unit, it makes installation straightforward. Only one thin harness is required to be routed through the firewall. The combination of the new 300kPa (43.5psi) integrated pressure sensor, the more compact solenoid valve, and the faster ECU processer, provide quicker response and the most stable boost curves yet. The PRofec also maintains popular features like, Lo, Hi, Scramble boost presets, last-boost display, peak-hold recall, warning alert, and safety limiter. Product Features: Display/Control Unit, Sensor Unit with Pressure Sensor, Boost Solenoid, and Adjustable Mounting Bracket Separating the Display Unit from the Sensor Unit To keep the Display Unit as slim as possible, a separate water-resistant Sensor Unit was developed. The added benefit of this, however, is the convenience of installation. Now that the Sensor Unit is mounted in the engine room, only a single thin harness is required to be routed through the vehicle's firewall. Select between 3 Types of Boost Display Screens (kPa or PSI) • Numerical Display • Bar Graph Display • Map Trace Display * Programable LO and HI Boost Pre-Sets, with a 3rd Scamble Setting *Intergrated 300kPa (43.5psi) high-performance boost pressure sensor (within the Sensor Unit) * The PRofec can display the last (peak) boost value after each boost session * The Peak-Hold Function can display the maximum boost recorded * Boost levels and stabilty can be fine-tuned by adjusting the GAIN and START BOOST settings. Warning Feature displays an visual and audio alert when the unit detects an over-boost situation. If the boost warning level is surpassed, the PRofec can reduce boost levels via a programable Limiter Function Easy to use controls Simple rotary-dial and dual push-button layout was designed and developed with an emphasis on simple operation Intuitive Dial Operation Unique to this latest generation PRofec is a larger ergonomic rotary-dial control. Along with a new compace display unit size, the controller can be easily mounted within reach of the operator. This all together creates an intuitive boost controlling experiance. New Compact Solenoid and Improved CPU Control The PRofec uses a new more compact 3-port boost solenoid, controlled by a faster CPU. The result is a quicker responding system, that provides our most stable boost curves yet. Excellent Visibility with the OLED Display OLED (Organic Light-Emitting Diode) display offers excellent visibility at a wider range of angles.It is also much brighter then standard LCD screens, allowing the display to be more compact, yet still effective. Slim Design Offers Multipule Mounting Options (89mm X 36.5mm - 11mm thick flat-screen) Surface mounting, as well as, the rotating of the display by 180 degrees, opens up numerous mounting options. An adjustable mounting bracket is also included.