Pneumatic Suction Dent Puller for 75-125mm

Air Suction Dent Puller│ panel repair │ tools for cars

Pneumatic Air Suction Dent Puller for 75-125mm Car Body Panel Dent

【 Strong Vacuum 】 The pneumatic suction pad can firmly grasp the panel. Universal Car Spanner Fuel Pump Lid Adjustable Tank Cover Remover Wrench Tool.

Pneumatic Suction Dent Puller 75-125mm Car Body Panel Dent Repair Slide Hammer T

OTHER - AIR TOOLS & ACCESSORIES - GM Tools Shop Online

Specification: 1. Our Air suction dent puller is used to repair the auto body damage. It can work by itself and there's no need to use extra items. 2. It must work with an air compressor. Its air working pressure is about 70170 PSI 5 bar 12 bar. For some small dent 170 PSI is recommended. The pad can work with a dent with round and smooth surface and the pad will be sucked easily. 3. Moreover the range of dent must be smaller than the pads. 4.

Fit Tools Air Suction Dent Puller Remover with 10 Pcs Glue Tabs

Instruction Screw the suction cup onto the slide hammer and remove the protective cover. Connect the air compressor to an air route with a suitable rated supply pressure. Ensure that the panel to be worked on is dry, clean and free of grease. Position the suction cup over the dent and press gently. Turn on the air compressor and air valve. Use the sliding hammer to pull out the dent. Please do not apply excessive force to the slide hammer.

EWK Pneumatic Suction Dent Puller for 75-125mm Car Body Panel Dent Rep

FIRSTINFO A1501US Pneumatic Dent Puller- Vacuum Suction/Slide

Air Vacuum Dent Puller AVDP-75125 - ITools

Essential Wholesale suction cup dent puller For All Automotives